- 3D image fusion
-
3D image fusion in endovascular procedures
Studies¹,² have shown the advantages of a 3D perspective for catheter and device guidance. With VesselNavigator, clinicians can easily segment 3D vessel structures from existing CT/MR datasets and fuse them with live X-ray for guidance. - Reduction in contrast usage
-
Reduction in contrast usage
Average contrast medium usage was reduced by 72% in a study¹ that used Philips CTA image fusion guidance during endovascular repair of complex aortic aneurysms. No intraprocedural contrast agent injection was required to create a roadmap. - Potential to reduce procedure time
-
Potential to reduce procedure time
Philips CTA Image Fusion Guidance may lead to shorter procedure times. A study of 62 patients² showed an average reduction in procedure time from 6.3 to 5.2 hours during FEVAR/BEVAR procedures using Philips CTA image fusion guidance. - Moves in sync to new positions
-
Moves in sync to new positions
During the procedure, VesselNavigator provides a real-time overlay that moves in sync with any projection, table and system position. This can reduce the need to make additional contrast enhanced runs to create new roadmaps. - Superb image quality
-
Superb image quality
Create overlays based on a variety of superb volume rendering visualization options. These can be customized according to user preferences. - Anatomical
-
Anatomical ring markers
Ring markers can be added to the segmented image to indicate the ostia and landing zone and to define planning angles. These markers are visualized during the procedure for guidance.
3D image fusion in endovascular procedures
3D image fusion in endovascular procedures
3D image fusion in endovascular procedures
Reduction in contrast usage
Reduction in contrast usage
Reduction in contrast usage
Potential to reduce procedure time
Potential to reduce procedure time
Potential to reduce procedure time
Moves in sync to new positions
Moves in sync to new positions
Moves in sync to new positions
Superb image quality
Superb image quality
Superb image quality
Anatomical ring markers
Anatomical ring markers
Anatomical ring markers
- 3D image fusion
- Reduction in contrast usage
- Potential to reduce procedure time
- Moves in sync to new positions
- 3D image fusion
-
3D image fusion in endovascular procedures
Studies¹,² have shown the advantages of a 3D perspective for catheter and device guidance. With VesselNavigator, clinicians can easily segment 3D vessel structures from existing CT/MR datasets and fuse them with live X-ray for guidance. - Reduction in contrast usage
-
Reduction in contrast usage
Average contrast medium usage was reduced by 72% in a study¹ that used Philips CTA image fusion guidance during endovascular repair of complex aortic aneurysms. No intraprocedural contrast agent injection was required to create a roadmap. - Potential to reduce procedure time
-
Potential to reduce procedure time
Philips CTA Image Fusion Guidance may lead to shorter procedure times. A study of 62 patients² showed an average reduction in procedure time from 6.3 to 5.2 hours during FEVAR/BEVAR procedures using Philips CTA image fusion guidance. - Moves in sync to new positions
-
Moves in sync to new positions
During the procedure, VesselNavigator provides a real-time overlay that moves in sync with any projection, table and system position. This can reduce the need to make additional contrast enhanced runs to create new roadmaps. - Superb image quality
-
Superb image quality
Create overlays based on a variety of superb volume rendering visualization options. These can be customized according to user preferences. - Anatomical
-
Anatomical ring markers
Ring markers can be added to the segmented image to indicate the ostia and landing zone and to define planning angles. These markers are visualized during the procedure for guidance.
3D image fusion in endovascular procedures
3D image fusion in endovascular procedures
3D image fusion in endovascular procedures
Reduction in contrast usage
Reduction in contrast usage
Reduction in contrast usage
Potential to reduce procedure time
Potential to reduce procedure time
Potential to reduce procedure time
Moves in sync to new positions
Moves in sync to new positions
Moves in sync to new positions
Superb image quality
Superb image quality
Superb image quality
Anatomical ring markers
Anatomical ring markers
Anatomical ring markers
Workflow
Step 1: One-click vessel segmentation
Select vessels for overlay.
Step 2: Ring markers
For indicating ostia and landing zone. For indicating ostia and landing zone. For indicating ostia and landing zone.
Step 3a: Image fusion
Fuse CT/MR dataset with 2D images
Step 3b: Image fusion
Fuse CT/MR dataset with 3D images
Step 4: Choice of volume rendering visualizations
Start using live 3D image guidance
Related products
-
Azurion Hybrid OR
- Excellent imaging and workflow optimization
- Full positioning freedom and ease of use
- Switch to the clinical suite you need, when you need it
- Effectively manage radiation dose
View product
-
Azurion 7 C20 & Azurion 7 F20
- Floor- or ceiling-mounted image-guided therapy system with a 20" flat detector
- Enhance visibility for diverse vascular, oncology and cardiac procedures with great image quality
- Control all relevant applications via the central touch screen module at table side
- For a hybrid suite solution, the Azurion 7 C20 can be combined with the Philips FlexMove option
View product
-
FlexVision Pro
- High-resolution, full-color 58'' LCD display for full table side control in the exam room
- Display and control pre-procedural data, multimodality imaging and interventional applications
- Use Super Zoom to take any image from 32% to as much as 420% without loss of detail
- Create and save screen layouts with ProcedureCards to simplify set-up for procedures and/or users
View product
-
SmartCT Angio
- 3D visualization of vascular pathologies from a single rotational angiographic X-ray acquisition
- Improve visibility of vasculature in cerebral, cardiac, abdominal and peripheral anatomies
- Acquire and interact with 3D imaging at table side
- 3D imaging can reveal information not apparent on 2D or DSA images
View product
-
SmartCT Roadmap
- Accurate and dynamic 3D guidance tool
- Full 3D view with reduced X-ray dose and contrast medium
- Adapts to position changes in real-time
- Variable settings to enhance visualization
View product
-
SmartCT Soft Tissue
- Step-by-step guidance technique to simplify cone beam computed tomography acquisition
- Interact with your CBCT image at table side on the touch screen module
- Access advanced 3D measurements at table side on the touch screen module
- CBCT open
View product
-
XperGuide
- Needle navigation technology with CBCT for accurate reach of lesions as small as 1 cm or below
- Supports procedures from biopsies and drainages to radiofrequency ablations
- Six times less needle repositioning compared to conventional CT
- 29% less skin dose compared to conventional CT
View product
-
FlexVision XL for Allura
- Large, full-color LCD display gives you space to work
- SuperZoom brings images closer to you
- Flexible display for the right information at the right time
- Full integration with Allura Xper system to easily switch views
View product
-
Azurion Hybrid OR
The Azurion Hybrid OR opens the door to new procedures, in an environment designed to support you in performing a wide range of open and minimally invasive treatments. The solution gives your medical teams outstanding flexibility, efficiency and ease of use. Work with confidence, supported by market-leading 2D and 3D image guidance, stringent infection control and dose management measures. The Azurion Hybrid OR solutions enable your facility to be at the forefront of clinical excellence, while helping you reduce the cost of care.
View product
-
Azurion 7 C20 & Azurion 7 F20
Experience outstanding interventional cardiac and vascular performance on the Azurion 7 Series with 20'' flat detector. This industry leading image-guided therapy solution supports you in delivering outstanding patient care and increasing your operational efficiency by uniting clinical excellence with workflow innovation. Seamlessly control all relevant applications from a single touch screen at table side, to help make fast, informed decisions in the sterile field.
View product
-
FlexVision Pro
When your interventional lab performs a variety of cases, efficient control of applications can promote effective teamwork and care. With FlexVision Pro, you can intuitively control all available applications at table side via seamless mouseover to streamline your workflow. This can increase efficiency and reduce the need to leave the sterile field during cases.
View product
See all related products -
SmartCT Angio
This X-ray acquisition technique generates a complete high-resolution 3D visualization of cerebral, cardiac, abdominal or peripheral vasculature from a single rotational angiography run – all controlled via the touch screen at the table. This can improve visibility of tortuous or complex anatomy that may not be seen on a 2D or DSA image.
View product
-
SmartCT Roadmap
SmartCT Roadmap facilitates complex interventions by providing live 3D image guidance that can be segmented to emphasize target vessel and lesions, aiding guidewire and catheter navigation through complex vessel structures. All controlled via the touch screen at the table.
View product
-
SmartCT Soft Tissue
SmartCT Soft Tissue offers a Cone Beam CT (CBCT) acquisition technique augmented with step-by-step guidance, Advanced 3D visualization and measurement tools all accessible on the touch screen module at table side. To support you in acquiring CBCT images first-time right [1] and to streamline your workflow, you are guided through key steps. Once the CBCT scan is successfully performed, the acquired 3D image is automatically displayed in the SmartCT 3D visualization tool with the adequate rendering settings and the 3D measurement tools tailored for the selected 3D protocol.
View product
-
XperGuide
XperGuide offers live 3D image needle guidance, letting you bring percutaneous needle procedures into the interventional lab. It overlays live fluoroscopy and 3D soft tissue imaging data from previously-acquired CT or MR scans or Philips XperCT, providing information on the needle path and target.
View product
-
FlexVision XL for Allura
See tiny details of complex cardiovascular anatomy more easily with Philips FlexVision XL large, full-color 58"- LCD display for the interventional suite. It lets you flexibly view multiple images from different sources, for specific interventions.
View product
- 1. Tacher V, et al (2013). Image Guidance for Endovascular Repair of Complex Aortic Aneurysms: Comparison of Two-dimensional and Three-dimensional Angiography and Image Fusion, J Vasc Interv Radiol, 24(11), 1698-1706. http://www.ncbi.nlm.nih.gov/pubmed/24035418
- 2. Sailer AM, et al (2014). CTA with fluoroscopy image fusion guidance in endovascular complex aortic aneurysm repair, Eur J Vasc Endovasc Surg. 2014 Apr;47(4):349-56. http://www.ncbi.nlm.nih.gov/pubmed/24485850