Pure water or no water
Pure water or no water with Power UV+ remove's bacteria, virus, cysts and improves the taste of water. Pure Protect Lock locks purifier from dispensing impure water when filter reaches lifetime or an error is detected in purifier.
See all benefitsUnfortunately this product is no longer available
Find similar productsPure water or no water
with Pure Protect Lock
WQA (Water Quality Association, USA) only awards the Gold Seal to those systems, components or additives that have met or exceeded industry standards for contaminant reduction, structural integrity, and material safety. This product is certified by WQA to conform to NSF/ANSI 42 for the removal of chlorine and particulates(removes all classes of particulates from Class I till Class VI - particle size 0.5µm till 80 µm), NSF/ANSI 53 for the removal of turbidity, volatile organic chemicals(VOC’s)and cysts and NSF/ANSI 55 Class A for microbiological dis-infection.
Advanced state-of-the-art UV (PLS) technology destroys known waterborne viruses, bacteria,parasites and amoebae while the activated carbon and sediment filter removes turbidity, chlorine, volatile organic chemicals (VOC’s), cysts, larger micro-organisms and improves taste.
This appliance has low electricity consumption and is rated at 25 watts. To make it even more energy efficient, the UV lamp switches off when the appliance has not been used for 10 minutes.
Replacing the filter is something you can easily do yourself thanks to the simple Tilt & Twist mechanism.
The maximum flow rate of 1.2 liter per minute ensures that you have safe drinking water available at any time.
Product is certified according to microbiological performance standard BIS 14724 and Drinking water standard BIS 10500 by the Bureau of Indian Standards
While the purifier is dispensing water, an optional musical reminder will notify you that the dispenser is on.
Tested by Kiwa Water Research: Microbiological performance tested by Kiwa Water Research (The Netherlands) according to the NSF standard 55, Class A protocol (2004).
After 2700 liters of water consumption, PureProtect alert sends out a signal. There will still be enough capacity for another 300 liters after the signal.
Purification system
9 W
Design specifications
3.6 kg
287 x 156 x 422 mm
Purification system
9 W
Design specifications
3.6 kg
287 x 156 x 422 mm
Input water conditions
0.5 bar
5 °C
2.0 bar
45 °C
General specifications
max 1.2 l/min
220-240 V
50 Hz
25 W