How to flush/prime my Manual Espresso coffee machine.
Before you can use your Manual Espresso machine for the first time or in case the internal circuit has run out of water, you need to flush/prime the machine with fresh water. Find below easy instruction how to achieve this.
Steps how to flush/prime the machine.
Rinse and fill the water tank.
Insert the plug and switch the ON/OFF button on the back to the “I” position.
The “Power-ON” light at the front will turn on.
Place a container under the classic milkfrother.
Open the “Hot water /steam” knob on the side by turning it counter clockwise.
Set the Selection knob to the “Coffee” position. Dispense the whole water tank.
When finished close the “Hot water/steam” knob and set the Selection knob to the “Neutral position”.
The machine is now flushed/primed and ready for use.