Warm and cozy bathing
With 200W Heat-Express technology, Philips electric water heater reduces waiting time which can be heated quickly. Meanwhile, it use enamel inner tank with Magnesium anode to prevent corrosion, durable and safe.
See all benefitsWarm and cozy bathing
SafeShield all-around protection
Through the 200W 310S stainless steel heating element heating, the heater can reduce your waiting time for a cozy bathing. Anti-corrosion, anti-scale, anti-oxidation in high temperature, high heat transfer efficiency and durable.
SPCC inner tank with electrostatic enamel coating and magnesium anode can stabilize heating and insulation performance and great corrosion resistance for longer using life.
Waterproof construction design, passed IPX4 waterproof test. It can be installed in the bathroom
Equipped with ELCB safety device reduces risks of electric shock for a safer bath.
High density Polyurethane integrated foaming layer reach about 33% higher than that of normal EPS foam material;Integrated foaming layer has good sealing and watertight.High temperature resistance and durable; Greatly improved thermal insulation effect.
Equipped with temperature sensor and control the temperature in time. When the water temperature is higher than 75 degrees Celsius, the electric supply will be cut off automatically to prevent the water heater from overheating and protect users from scalding.
When the heating elements are working without water in the inner tank, the thermal cut-out will take action and cut off the power to prevent damage to heating element, protect the water heater.
30~75 degrees Celsius more freedom in adjusting the temperature; Equipped with temperature sensor and control the temperature in time; The heater will auto-stop heating when it reaches the set temperature and reheat while the temperature drops 5-8 , which is energy-saving.
General specifications
458*930*240 mm
7.1 kg
Yes
405*395*390 mm
8.7 kg
10 L
IPX4
Main parameters
Mechanical control
Dark Grey
Vertical installation
220V~50Hz
Single heating element
200 W
0.7MPa
30-75℃
General specifications
458*930*240 mm
7.1 kg
Yes
405*395*390 mm
8.7 kg
10 L
IPX4
Main parameters
Mechanical control
Dark Grey
Vertical installation
220V~50Hz
Single heating element
200 W
0.7MPa
30-75℃
Country of origin
China
Service
2 years
8 years for the inner tank