Home

Air purifier and Air humidifier

2000i Series

Air Purifier and Humidifier

Breathe the difference

Philips 2-in-1 purifier cleans rooms up to 65 m² and quickly humidifies the air at a rate of 500 ml/h. With app control and sensors, it scans the air and automatically adjusts to humidify and clean the air of allergens and pollutants.

See all benefits

Buy this product at:

See all retailers

Breathe the difference

Removes 99.97% of particles down to 0.003 microns

  • Purifies rooms up to 65 m²
  • 250 m³/h clean air rate (CADR)
  • 500 ml/h humidification rate
  • Connected with CleanHome+ app

Track and control with the app

Monitor the air quality and control your air purifier anytime, anywhere with the Clean Home+ app. Get alerted when air quality is not right.

AeraSense accurately senses and displays air quality

AeraSense sensor scans the air 1000x a second and displays air quality in your home at a glance. The display shows the level of allergens and PM2.5 in numerical form, as well as with an intuitive color ring.

Up to 250 m3/h CADR: Purifiers rooms up to 65 m2

The key performance indicator of a purifier is CADR (Clean Air Delivery Rate): the clean airflow generated in 1 hour. The higher CADR, the faster the cleaning. The dirtier the room, the higher the CADR must be. This purifier has a CADR of 250 m3/h (1) and it can effectively purify a whole room of up to 65 m2 (2).

Low energy consumption

Thoroughly tested for quality you can trust

HEPA filter captures 99.97% of particles of 0.003 microns (3

Sleep mode with ultra-quiet operation

Removes up to 99.9% of viruses and aerosols from the air

2in1 and purifier-only settings with auto and manual modes

NanoCloud technology: hygienic humidification without fuss

Automatic humidification up to 500 ml/h with 4 settings

Technical Specifications
  • Energy efficiency

    Max. power consumption

    35  W

    Stand-by power consumption

    <2  W

    Voltage

    220-240  V

  • Air quality display

    AeraSense technology

    Yes

    Air quality feedback
    • Color ring

    • numerical

    Particle level (PM2.5)

    Yes

    Indoor Allergens Index (IAI)

    Yes

    Humidity level

    Yes

  • CADR: tested by third party according to GB/T 18801-2015
  • In a room of 20m²: It is a theoretical time for one-time cleaning calculated by dividing its CADR 250m³/h by the room size of 48m³ (assuming the room is 20m² in floor area and 2.4m in height).
  • Humidification rate: Tested by GB/T 23332 in Philips internal climate chamber, 2017. Chamber size 25m², initial temperature of 20±2°C and relative humidity of 30±3%RH.
  • Microbial Reduction Rate Test conducted at Airmid Healthgroup Ltd. tested in a 28.5m³ test chamber contaminated with airborne influenza A(H1N1).
  • Prevent spreading white dust or wet spots: Independent third-party test Determination of deposition of minerals from liquid droplets on furniture, according to DIN 44973, IUTA e.V. To determine mineral deposits onto furniture from airborne liquid droplets over a period of 3 hours.
  • Professional grade sensor: Benchmark with Grim sensor and comparison with industry infra-red sensor.
  • Reduce bacteria: Tested by Shanghai Institute of Measurement and Testing Technology (SIMT) in 30m3 chamber according to GB21551.3-2010, (Staphylococcus albsp) 8032 as testing bacteria
  • Room size: Calculated according to GB/T18801-2015.
  • Airborne bacteria concentration in a room depends on many factors such as air exchange, room size and configuration.
  • Results are based on the release of the bacterium Staphylococcus albus from the appliance. Sterilized water spiked with said bacterium was used in the water tanks during the tests. (Filters -if available- were removed from appliances).
  • Tested on the filter media with NaCl aerosol, classified at 3nm according to DIN71460-1, in 2017 by third party test lab.
  • Tested on the filter media with 1 pass efficiency at 5.33cm/s airflow, in 2017 by third party test lab.